Full Answer
What are vape coils and atomizer heads?
But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience. Housed within the vape tank, an atomizer head contains a coil of thin wire and wicking material.
How does an e-liquid vape work?
This is thin wire, wrapped into a coil. When you press your button, it provides power to the coil. This then converts that energy to heat (If you could see your coils, they sometimes glow red when you are pressing your button), and vapourises e-liquid from the saturated wicking material.
Is it safe to vape with burnt coils?
Unless one is traveling, has no access to a vape store, or waiting for a new pack of vape coils, vaping with burnt coils is not recommended. Though vaping with a burnt coil won’t cause lasting harm, it may cause you to choke or vomit immediately after vaping.
How do temperature control vape coils work?
The power sent to the coil then automatically adjusts to keep the coil—and your vape—at the chosen temperature. It all began with the creation of the DNA chip by a company called Evolv in 2014. Even now, many still consider mods with DNA chips to be the best temperature control mods on the market.
How do I lock my vape?
Locking Your Vape Simply start by pressing the button(s) a few times in quick succession to lock the vape pen. The best way to test whether it has been successfully locked is to press the button again to see if the light comes on, flashes, or otherwise stays on.
How do I know when my coil needs changing?
5 Signs That Your Coil Needs ReplacingBurnt Taste. The first and most prominent way to tell your coil needs changing is by experiencing an unpleasant burning taste in your vape.Bubbling Noise. In this case, your device is literally telling you to change the coil. ... Weak Flavour. ... Little Vapour. ... Leaking Device.
How often should you change your vape coil?
Your Coil Is Used Up If you're a heavy vaper, using your e-cig many times a day. You might need to change the coil every couple of days. If you are a regular vaper but not particularly heavy, it could last a week or two. Irregular or casual vapers might find they need only change their coil every four weeks.
What happens if you dont change vape coil?
Vape coils are made of wire and a cotton wick – the wick absorbs the e-liquid and then the coil heats the wick, creating vapour which you then inhale. It's important to regularly replace your coil, as failure to do so will result in an unpleasant burning taste in your throat when you inhale.
Why is my coil burning after 1 day?
If you vape at a wattage that's too high for you coil head, your e-liquid will vaporise too quickly. When this happens, the wick can't re-saturate quickly enough, so the coil ends up burning the wick which causes that unpleasant burnt taste.
How many puffs before I change my coil?
Depending on how much you vape, it may need changed as often as once a week or as infrequently as once a month. Using your vape more frequently means you'll need to change the coil more often, but even if you rarely vape, your coil will still need to be replaced at least once a month.
How often should you vape a day?
There is no one answer to the question of how often you should vape, as it depends on a variety of factors. Some people may find that they enjoy vaping every day, while others may only want to vape occasionally. The most important thing is to figure out what works best for you and stick to it.
Why is my vape bubbling when I hit it?
Unfortunately, there are a few different causes for your vape spitting and popping. This can range from the vape device being at too low a wattage, preventing the e-liquid from heating up correctly, to over-priming your coil. That's when you saturate your wick (often organic cotton) with too much e-liquid.
Can I change my coil with juice in the tank?
If there is any vape juice still in your tank, dump it out in your trash can. This way, you can replace it with fresh juice after you put on a fresh coil. It is helpful to replace your coil with as little vape juice remaining as possible.
How many hits does a coil last?
On average, a decently constructed coil for a sub-ohm tank should last you 4 days to 1 week. If you vape less because you cannot vape during work hours, or you do not vape throughout the day, then your coils are likely to last twice as long.
How can I make my coils last longer?
How do I get my coil to last longer?Set your wattage closer to the lower end of the wattage range. ... Take shorter puffs. ... Allow more time between puffs. ... Vape juices that are less sweet. ... Prime the coil properly before use.
Can a burnt coil ruin your vape?
If your coil is only slightly burnt, you may get a slight burnt taste, as if something's not quite right. Given that we know that burnt coils can produce harmful chemicals, you should probably still change it. Occasionally, you'll also get a burnt taste when you have just replaced a burnt-out coil.
How long does a woman's coil last for?
An IUD is a small T-shaped plastic and copper device that's put into your womb (uterus) by a doctor or nurse. It releases copper to stop you getting pregnant, and protects against pregnancy for between 5 and 10 years. It's sometimes called a "coil" or "copper coil".
How long does a Mirena coil last?
Mirena must be removed after 8 years. However, your healthcare provider can place a new Mirena during the same office visit if you choose to continue using Mirena.
What Colour is a burnt coil?
A burnt coil isn't always obvious at first glance. A classic sign that the coil is about to go, even when it may appear to be fine, are fine "strands" of yellow or darker orange coming from the wicking ports in the coil.
How do you know when your vape is dying?
When you notice a decline in the amount of vapor produced after each puff, and the blue light at the tip no longer illuminates when you puff, then it's time to throw away the disposable vape.
How do vape coils work?
Coils, which are sometimes referred to as atomisers, are the component of your vaping device that creates vapour.
What are the different types of coil?
MTL or “mouth-to-lung” coils are designed to replicate the experience of smoking a traditional cigarette. This means a tight draw and low power output. Generally, MTL coils are designed to be used with higher nicotine strength e-liquids, to further simulate the “throat hit” of a cigarette.
What is coil in vape?
The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.
What are atomizer coils made of?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.
How does an atomizer head work?
An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.
What happens when the resistance of an atomizer is lower?
As we mentioned briefly before, the lower the resistance of the atomizer head, the more power it can accommodate, therefore more vapour is produced.
What is the resistance of an atomizer?
Well atomizer heads have an electrical resistance value measured in ohms (Ω). Depending on the amount of electrical resistance will depend on what ‘ohm’ your atomizer head is. Atomizer heads generally fall into two categories. High and low resistance.
What happens when you press a button?
When you press your button, it provides power to the coil. This then converts that energy to heat (If you could see your coils, they sometimes glow red when you are pressing your button), and vapourises e-liquid from the saturated wicking material.
What is the outer casing of an atomizer?
It is the outer casing which attaches directly to the base of the tank and provides electrical contact to the coil.
How Long Can You Vape With a Burnt Coil?
If your coil produces some burnt hits and the flavor isn’t too bad, you can temporarily use a burnt coil. It may not taste as good as a new coil, but you still can get some use out of it.
What Type of E- Juice is Best for Vaping with a Burnt Coil?
The best e-juice for vaping with bad coils are those with higher vegetable glycerine (VG) content or it may become too runny.
What is “temperature control” vaping?
Temperature control (TC) in vape mods is a technological solution for dry and burnt hits. It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter. The user chooses the temperature limit, typically from a range of 300°F to 600°F (100°C to 315°C). The power sent to the coil then automatically adjusts to keep the coil—and your vape—at the chosen temperature.
Why is my vape consistent?
Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.
What is the best wire for vaping?
TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.
How to fix dryness in vape?
When vaping in TC, if you do notice any dryness when you’re low on juice, adjust the temperature down. If your mod has wattage control in TC, you can adjust that too. Higher is usually fine, but don’t go too low; as mentioned earlier, your mod should limit your wattage when the set temp is reached, but it won’t compensate when the wattage is set too low.
What type of wire do you use for vaping?
Next, you must vape with the right wire type. TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
How does TC vaping work?
For TC vaping, you’ll use wires that have a known resistance-increase as their temperature rises. The mod checks the resistance of the coil at room temperature, then it continues to monitor it as you vape. The resistance change is converted into a temperature increase and the mod adjusts its power to maintain the selected temperature. Think of it as a car traveling in cruise control. To maintain a speed, more power is needed to go up a hill than down a hill… but the speed would stay the same.
Why do TC coils last longer?
TC coils can last longer than normal power-mode coils, and wicks last a lot longer too because they’re not exceeding the designated temperature necessary for a good vape.
What does it mean when a vape coil is over primed?
An over primed coil will give off a gurgling sound (and feel) when you try to draw on your vape. As you can imagine this leaking and gurgling leads to spitting back. You'll be getting splashes and “spits” of your vape liquid when you're trying to use your vape.
What happens if you add too much vape juice to your coil?
If you add too much vape juice to your coil, you're essentially going to end up flooding it. First, your device isn't going to work as uniformly as with a properly primed coil.
What does priming a coil mean?
To prime a coil, you merely use a small amount of vape liquid to wet the wick before you begin using it. There are slight variations in technique for different models and coil types, but we’ll get to that in just a moment.
Why do you need to prime your coil before use?
If you're a vaper that doesn't prime your coils, you're probably wondering why it's even necessary. I mean, you've been using your vape without priming your coil so far, right?
How to prime a metal coil?
Every few weeks you’ll need to replace your vape coil, and you want to prime it slowly. Gradually getting a new coil primed helps the metal break into subtle expansions and contractions that naturally happen when metal is heated and cooled.
How long does it take for a vape to absorb liquid?
It should take anywhere between 10 and 15 minutes to absorb and be ready for use.
How to moisten a vape coil?
On the side of the coil, you should see a small bit of exposed cotton. Lightly moisten the wick with only one to two drops of your vape liquid.
How Do Vape Coils Work?
What Are The Different Types of Coil?
- MTL/”mouth-to-lung” coil
MTL or “mouth-to-lung” coils are designed to replicate the experience of smoking a traditional cigarette. This means a tight draw and low power output. Generally, MTL coils are designed to be used with higher nicotine strength e-liquids, to further simulate the “throat hit” of a cigarette. Yo… - DL/”direct-to-lung” coil
DL or “direct-to-lung” coils are designed to accommodate high power, large airflow and massive vapour production. These days, most DL coils use strips of mesh instead of traditional round wire. You can identify a coil head that’s intended for DL vaping by looking at the diameter of the coil in…
Round Wire vs Mesh – What’s The difference?
- Traditional round wire coils and coils made using mesh strips are both extremely common, but what’s the difference and which one is right for you? Typically, round wire is used for lower-wattage coil heads. This is because they perform very well at low temperatures. Also, the manufacturer can easily tweak performance by changing the wire thickness or number of wraps…
Duoprime – A New Era For Coil Design
- At Innokin, we’re always looking for ways to improve the vaping experience. As mentioned previously, mesh coils are excellent at increasing e-liquid absorption. What if there was a way to increase wicking efficiency even more using mesh strips? With this in mind, our engineers designed DuoPrime technology. DuoPrime works by implanting an outer layer of mesh between …