Vaping FAQs

what to know before mech vaping

by Monserrat Purdy III Published 1 year ago Updated 1 year ago
image

How many ohms should a Mech mod have?

How far can you go in Mech mod?

What is a Hybrid Mech Mod?

How much current does a Mech mod create?

Can you use a Mech mod on a dripper?

Can you use vape tool on Android?

Can you use RDA on a Mech mod?

See 2 more

image

What is the best resistance for a Mechanical Mod?

Hi, my name is Paul. I've had the SMPL Mechanical Mod and the Velocity RDA for a while. But I haven't been able to pin-point a good build and resistance. I have a Samsung 25R. The best I've been able to do was a 4 wrap 22g kanthal around a 3mm...

Best Coil Build For Mech - An Ecig and Vaping Forum

Yes, this has been discussed before in other threads. But, I couldn't seem to find a definitive answer. I just got a Beyond Vapes Beacon mech and want to be able to use it to it's fullest. I've only used regulated devices in the past - mainly an iStick 50 and a 100. For RDAs I have a...

Proper Wattage for a 0.4 Ohm Build | E-Cigarette Forum

So, I built another coil that is 0.7 ohms, but the Hana will still not push it consistently. I'm using 24 gauge kanthal, and with the 12 wraps I'm putting around a 10 gauge nail it is getting harder and harder to get the coils to fit inside the atty.

Best coil set up for mech?? - Vaping Underground

I'm really just looking for opinions. I have several mechs and don't really use them much because I can't find a set up to throw in them that I enjoy. I'll put set ups in them and they just don't chuck like they do in my other mods. Any suggestions would be much appreciated!

Ohm's law | Steam Engine | free vaping calculators

Ohm's law calculator with real-time results as you change volts, current (amperage), resistance or power (wattage). The fields can be individually locked.

Where is the firing switch on a tube mech?

While they are rare enough, there are some tube mech MODs that have the firing switch on the side of the barrel rather than the bottom. This doesn’t change much about how the device itself functions. Still, it’s a nice option to consider for purely ergonomic reasons.

Do mech mods have battery life?

Unlike regulated MODs with a nice screen, mech MODs don’t have any sort of battery life indicator. They don’t even have a default “Weak Battery” cutoff that will stop you from draining your batteries beyond all repair.

Is stainless steel a good material for a mech?

As one of the most common materials on the planet, it makes sense that mechanical MOD manufacturers would reach for this highly durable metal when making their devices. Stainless Steel is extremely durable, resistant to all kinds of rust, decay, and corrosion, and comes in a variety of grades for ultimate versatility. Because of this, a stainless steel mech MOD is guarantee d to look great for a long , long time.

Who tests batteries for vaping?

Mooch independently tests batteries specifically for vaping. He is an engineer and has done a lot of legwork for all of us. If the battery is not on his list, don’t use it! Many batteries have exaggerated ratings, especially when it comes to amperage. So do yourself a favor and do some research before you try any battery in a mech.

How long do mech mods last?

The biggest appeal is the simplicity of these mods. Not to mention longevity. A well-made mech mod will last virtually forever if you keep it clean and maintained because there are no wires or electronics involved.

Who are Mechanical Mods For?

For anyone searching for simplicity! For me, that’s the biggest appeal. No screens or electronics. No temperature control. Just hit the button and vape!

What was the first tube style mech?

The first “tube style” mechs were modified flashlights! Made from high powered 18650 flashlights, these were usually modified in a way where there was a copper switch added to the bottom, and a drilled out section on top to fit your atomizer. Have you ever wondered where the word “ Mod ” came from? Its because the first cloud chasing vapes were “modified” from other items! This lead to many people becoming “Modders” and popularity took off.

Why are Kennedy mods so expensive?

I know clones are cheaper. But that could easily come at the cost of your safety. The reason a Kennedy Mod costs so much is the superior crafting and quality parts. They are handmade and tested using calibrated machinery. Saving some cash is not worth the risk of your safety.

Is a mechanical mod good?

Mechanical Mods have been around almost as long as vaping. Many enthusiasts swear by them, and for good reasons. Using a mech mod can be very daunting at first and there is a ton of things to learn before you use one. There are also many types and they come in all shapes and sizes. Prices and quality vary depending on the mod, though these ones would be a great place to start.

Do mechanical mods have safety features?

With mechanical mods, there are rarely any safety features. This sounds scary, but if you do your research and keep safety first, then you shouldn’t have anything to worry about. First and foremost, it is important to know how to use Ohm’s law. I always build on a regulated device or an ohm reader.

How long does it take to feel the nicotine rush after a vape?

It usually takes about 30 seconds to feel the nicotine rush after the draw. As a beginner, we recommend starting with a 5-6 second draw and enjoying the relaxing experience and taste of vapour in your mouth.

Is there a right way to vape?

As with everything in the vape world, there is no ONE right way to do things. But there are some tips and techniques that could help you on your way to having that super satisfying experience that you’re no doubt after.

Can you cough with a vape atomizer?

When you’re inhaling your vape atomizer, you’ll also want to give it a nice smooth draw - that is don’t try to draw short, sharp inhales. You wouldn’t want to cough or worse, get any of the e-liquid in your mouth (heads up: it definitely doesn’t taste as good in its pure form…).

Can you inhale vapour directly into your lungs?

This might sound somewhat counterintuitive, especially if you’re an ex-smoker, but vapour, unlike tobacco smoke, is not necessarily meant to be inhaled directly into the lungs. You’ll want to try and experiment with a little bit of a draw - which is allowing the vapour to sit in your mouth for a few seconds before you think about inhaling into your lungs.

Is vaping a relaxed experience?

However, these few tips and techniques should help you to have a smoother ride. Remember: vaping is not meant to be rushed. It’s meant to be enjoyed in a relaxed setting so that you can open your senses to all the wonders and sensations that a vapourizer has to offer.

What to do if a website looks rubbish?

If the website looks rubbish, give it a miss.

Can you keep e juice out of reach?

This might seem obvious, but you can never be too careful: ALWAYS keep your E-Juice in a safe and out of reach place if you have kids.

Is vaping a consumer industry?

Vaping is not at all like the consumer electronics industry. Not even close. Things do break and products are often faulty.

Do you mess around with vape batteries?

This is super important, so don’t mess around when it comes to vape batteries.

Is vaping the best thing since penicillin?

One minute vaping is the best thing since penicillin, the next it is the second coming of the black death.

Can I use pre-made coils for vaping?

This is fine. I still vape using pre-made coils every now and then, as it can be more convenient.

What is a mechanical mod?

Sounds simple, right? A basic mechanical mod is a tube of metal, such as stainless steel, aluminum, or brass. Along with the tube, there’s a firing pin that allows for the current in the battery to reach the attached atomizer/cartomizer/clearomizer – causing the coil (s) to heat up and vaporize the juice.

Why does my mod battery fail?

There is a danger inherent in every mechanical mod – the battery. Batteries can fail, due to over-tightening the end-caps of the mod or atomizer. They can also over-discharge due to accidentally pressing the firing pin/button for too long, causing the battery to overheat and potentially burst.

Is a mech mod harmful?

They are basic, simple, and potentially harmful.

Can you buy a mechanical mod without seeing it first?

Never buy a mechanical mod without seeing it first. And by that, I mean you need to be able to get your hands on the mod before purchasing it. Think of it this way, just because your moms Ford Fusion is amazing, it doesn’t mean the one you’re buying won’t be free from defects either.

Do mechanical mods have electrical circuits?

With mechanical mods, you are not limited to this. Since there are no electrical circuits, there is nothing keeping your mod to fire no matter how low your coil’s resistance is. The lower the ohms (resistance) of the coil, the more amps it draws from the unregulated battery which causes more power to be delivered to the coil causing juice to be vaporized faster. This gives stronger flavor and more vapor.

How many ohms should a Mech mod have?

For a serial Mech mod (also called a Stacked mod), then you have to double the resistance. If you take Sony VTC 5A batteries, then you should never exceed 0.34 ohm. Although you should never vape on the precise threshold of the coil.

How far can you go in Mech mod?

Yes, you can put a coil of less than 0.2 Ohm in your RDA and use it on your Mech mod, but the lower the resistance the more likely you are to run the risk of an energy flow that can cause the battery to vent, or even in extreme circumstances, cause thermal runaway.

What is a Hybrid Mech Mod?

Please note: the average user is strongly recommended to avoid hybrid mechanical mods.

How much current does a Mech mod create?

A Mech mod in parallel will double the battery amperage limit. For example, two 15A batteries will create 30A of current. This should be taken into account when calculating resistance for maximum safety.

Can you use a Mech mod on a dripper?

In fact, it’s believed that a Mech mod on a Dripper can give you the best vape possible. Source : Vape Club. By simply pressing the Fire button, you complete a circuit that passes the power of your vape battery through your Mech mod and into your atomizer.

Can you use vape tool on Android?

Note that you can also use an Android application such as Vape Tool which offers many tools for vaping, including the calculation of Ohm’s law, but also a database for batteries. It has a paid version, but the free version is more than sufficient.

Can you use RDA on a Mech mod?

If you skip this vital step and use your RDA on your Mech mod without the break-in of your Resistance , the results can be lethal.

image

Explaining Mechanical Mods: The Basics

Image
Lots of products fall in and out of favor with vapers. We have seen the wattage wars, sleek pod-style vapes, and all kinds of atomizers. But one category that has been going strong for years is Mechanical Mods or “Mech” mods. Mechanical Mods have been around almost as long as vaping. Many enthusiasts swear by them, an…
See more on vapebeat.com

Safety First!

  • Before we even start talking about mechanical mods, I feel a safety disclaimer is in order. With mechanical mods, there are rarely any safety features. This sounds scary, but if you do your research and keep safety first, then you shouldn’t have anything to worry about. First and foremost, it is important to know how to use Ohm’s law. I always build on a regulated device or a…
See more on vapebeat.com

Clones and Safety

  • I knowclones are cheaper. But that could easily come at the cost of your safety. The reason a Kennedy Modcosts so much is the superior crafting and quality parts. They are handmade and tested using calibrated machinery. Saving some cash is not worth the risk of your safety. For me personally, it is also an ethics issue. I feel that it is wrong to basically steal someone’s idea and …
See more on vapebeat.com

History

  • Mech mods came from necessity. When Mech mods started gaining popularity, most vape experiences were limited to cartomizers andMTL rebuildable tanks. These were usually powered by a small mod that was either Variable Voltage (like an EGO pen, Wapari). When drippersstarted taking off, they needed a companion, and mech mods stepped in. The first “tub...
See more on vapebeat.com

Anatomy, Types, and Styles

  1. Hybrid tube
  2. Box style
  3. Series battery/stacked
  4. Unregulated
See more on vapebeat.com

Series and Parallel Battery Configurations

  • This where we get technical. Let’s look at battery voltages, ohm loads, and how different configurations affect your vape. Let’s look at the most popular mech battery, the Sony VTC5a: 1. Example: For each battery 2. Average Voltage: 3.7 Volts 3. Fully charged: 4.2 Volts 4. Battery Capacity: 2600 mah 5. Continuous discharge rating: 25 Amps When in series, the batteries are c…
See more on vapebeat.com

Unregulated Mods

  • Unregulated mods are in a league of their own. While your standard mech doesn’t have any safety features in place, unregulated mods usually do. Just like a mech, you hit a button and the mod will immediately fire. The difference is there is circuitry built-in. Usually, there is a fuse or a capacitor connected to the battery and this makes for safety in the case of a hard short or battery overloa…
See more on vapebeat.com

Who Are Mechanical Mods for?

  • For anyone searching for simplicity! For me, that’s the biggest appeal. No screens or electronics. No temperature control. Just hit the button and vape! I can certainly understand the people that are cautious when it comes to mechs. It’s easy to feel overwhelmed and confused, but once you understand how everything works, and you develop a routine of safety checks, mechs can be rea…
See more on vapebeat.com

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9