what is the best pg/vg ratio for vaping

Full Answer

Is 70 VG and 30 PG good?

70VG/30PG. This is the most common Short fill ratio you will see in vape shops. Will work well in most devices, should give you a smooth vape that still has that throat hit.

What's the difference between 50 50 and 70 30 vape juice?

70/30. This ratio is most commonly used in shortfill e-liquid and is much thicker than 50/50. This is due to the higher VG content. This e-liquid produces larger clouds of vapour and a quality flavour when paired with low resistance coils for Direct-Lung vaping.

What does 70% VG 30% PG mean?

The 70 VG / 30 PG Vape Juice is a type of e-liquid that contains a mixture of two bases, which include 70% Vegetable Glycerin and 30% Propylene Glycol. Vegetable Glycerin is a thick, natural liquid with a sweet flavor, which has a shorter shelf life due to its organic ingredients.

Is it better to have more PG or VG?

The PG/VG ratio you need depends on your personal preference and the coil resistance used. Higher VG liquids work better with lower resistance coils (less than 1ohm), whilst 50/50 e-liquids work well with higher resistance coils (more than 1ohm).

Which vape ratio is the best?

If you want maximum flavour out of your e-liquid, you want to choose an e-liquid with a balanced PG:VG ratio, so look out for a 50:50 ratio. Or favour PG in the e-liquid, so an e-liquid with a PG:VG ratio around 60:40.

What wattage should I vape at 70 30?

E-liquid devices over 1 ohm E-liquids that produce a more noticeable hit with less of a focus on taste intensity and vapour clouds have a high PG ratio (e.g., a 70/30 PG/VG ratio). The device's product information will recommend a wattage setting. For example, you could find that a 1.6-ohm coil may need 12 watts.

Is 80/20 PG VG good?

PG 20/VG 80 – This ratio will provide a super smooth vape with dense clouds. Vapers that use lower resistance coils may choose this kind of ratio for the smoothness it provides. Like the PG 30/ VG 70 this is also the choice for higher wattage vapers.

Does higher Vg burn coils faster?

Factor #2: Too Much VG Too much VG combined with a higher resistance level can cause a coil to work too hard to properly vaporize the e-juice, meaning that it dies out sooner. This is because VG, short for vegetable glycerin, is a thick and viscous ingredient that does not evaporate as easily as PG (propylene glycol).

Does high VG juice burn coils?

If your juice doesn't soak into the wick as quickly, you're more likely to run into dry puffs and possibly burn your wicks. This means that juices with a high VG content (70 % or higher) can cause problems with wicking and may ruin your coils.

What is the safest vape juice to use?

Vaping diacetyl-free e-juice is at least a safer option than e-juice with it. The most suspect aspects of vape juice have to do with the inhalation of the vape flavorings. Eliminating any non-essential elements from e-juice will in fact make it safer.

What vape juice produces the best clouds?

5 of the best e-liquids for cloudsTropika | Twelve Monkeys Classic 50ml. VG:PG 90:10. ... Boulevard Shattered I Wick Liquor 50ml. VG:PG 80:20. ... Double Drip Coil Sauce. VG:PG 70:30/80:20. ... Element Shortfills. VG:PG 80:20. ... Koi Shortfills. VG:PG 80:20. ... VG:PG ratio. ... Devices, coils & vaping style. ... A smoother vape.More items...

Which coil is best for 70/30 liquid?

Sub Ohm coilsAs a general rule of thumb, Sub Ohm coils should only be used with E Liquids in a 70% VG to 30% PG mix since VG is much thicker than PG. The low power resistance allows for much higher temperatures to be used, meaning more E Liquid can be vaporized in one go.

Is 70/30 vape juice good for pods?

The short answer: We recommend 70VG/30PG for all tanks and 50VG/50PG for pod systems!

Which coil is best for 70/30 liquid?

Sub Ohm coilsAs a general rule of thumb, Sub Ohm coils should only be used with E Liquids in a 70% VG to 30% PG mix since VG is much thicker than PG. The low power resistance allows for much higher temperatures to be used, meaning more E Liquid can be vaporized in one go.

What is the difference between 70/30 and 80 20?

With high quality fabrics made on the same weaving or knitting machine, a 70/30 material will be softer and more absorbent than an 80/20 material.

What is the meaning of 60 40 vape juice?

60% VG e-liquids contain a ratio of 60% VG (Vegetable Glycerine) and 40% PG (Propylene Glycol). As the main ingredients found in e-liquids, both VG and PG influence the potency of your e-liquid's flavour, throat hit, and vapour clouds.

What is the best VG/PG ratio for vaping?

Ideal VG/PG ratios in this range include 80/20 and 70/30.

What is VG/PG ratio?

The VG/PG ratio is exactly what it’s name suggests – the balance between VG and PG content in e liquid. Vapers have unlimited choice in which ratio to choose and it can be daunting for new comers to make an informed decision for his or her vaping needs.

What is DL vape?

DL is an innovation in vaping that took place over the past 4 years where vapor is inhaled directly from the vape mod into the user’s lungs. This delivers a powerful burst of flavor, nicotine, and big clouds. Many say this innovation makes vaping a more pleasurable way to consume nicotine as opposed to cigarettes because the sensation of flavor is so strong.

What is MTL in vaping?

MTL describes a method of vaping where the vaper first inhales a cloud of vapor into his mouth, and then inhales again to bring the vapor into his lungs. This method simulates the way most people inhale cigarettes, colloquially known as “shotgunning”.

What is the best carrier for vaping?

Propylene glycol is a favored carrier for suspending natural and artificial flavors in vape juice due to it’s low viscosity, ready availability, and of course, that on it’s own, it’s relatively tasteless. You can expect that for all intents and purposes, every e-juice on the market includes PG because very few flavorings are available in other carriers.

Why does my vape scratch my throat?

So if you are wondering why your vape is scratching your throat as if a wild cat is on the loose, then may be it is time you understood the what makes up 95% of your e juice – PG and VG.

What is the advantage of PG in vaping?

Another great advantage of PG is it’s relatively low viscosity. This means that the liquid more readily flows – think about the difference between pouring a glass of milk and a hefty dose of maple syrup. If you are the type of vaper/smoker who likes to drag for a good few seconds, exhale, and go for it again, then you need an e-liquid that quickly absorbs in the cotton wick to avoid a complete burnout hit to the throat. If you burn off the liquid quicker than it can replenish from the tank, then you will experience what is known as pure trauma in the realm of vaping – a dry hit.

What PG vs. VG Means?

The PG and VG are two types of liquids that make up most vape juices. There are also flavorings and nicotine levels that can be added to the e-liquids, even though you could vape unflavored juice, but it would be very bland.

What are the characteristics of VG?

The following are the significant characteristics of VG that is directly connected with why vapers may opt for or against it as their preferred e-liquid. VG has a Sweet Taste. Unlike PG which has no recognizable taste, VG has a sweet taste.

What is PG in food?

Propylene Glycol (PG) Produced from propylene oxide, PG is a synthetic organic e-liquid that is colorless and odorless with little or no taste. PG is also found in certain cosmetics products, and it is successfully used in food production. PG is the major flavor carrier in both e-liquids and food.

Is VG better than PG?

VG e-liquids are thicker than PG and will produce better and bigger clouds. Cloud chasers choose e-liquids with as much as 100% VG base. If you’re a cloud chaser, you’re most likely not concerned with other pleasures derived from vaping, hence the 100% VG e-liquid choice.

Does PG build up more than VG?

PG Produces Less Gunk. With a low density, PG does not build up as much gunk as VG. Unlike VG, the gunk from PG is less likely to clog your vaporizer’s heating element which means it doesn’t need the same amount of maintenance it would with a VG base e-liquid.

Is PG a flavor carrier?

PG is a Flavor Carrier. PG is an efficient flavor carrier. It is the main flavor carrier in e-liquids. Hence, e-liquids with intense flavors are more likely to have a higher PG base than not. PG is Thinner. PG is thinner than VG because of PG’s runny consistency.

Does VG produce throat hit?

VG doesn’t produce a significant throat hit compared to PG. VG Produce More Gunk. While VG’s thickness is a huge plus to vapor production, it also has its downside. Helped by its thick density, VG gunks up vaporizers which means there’s a need for regular maintenance of your vaporizer. VG’s Allergy Risk.

What is the best VG/PG ratio?

For beginners, a more balanced VG/PG ratio would be most appropriate like a 50VG/50PG or 60VG/40PG.

What is the biggest factor to consider when choosing a VG/PG ratio?

Coil resistance is is the single biggest factor to consider when choosing a VG/PG ratio.

What is VG?

VG stands for vegetable glycerin or vegetable glycerol. It is a clear liquid that is usually extracted from soybean, coconut or palm oils. It is prevalent in almost all E-liquids you’ll find. We don’t need to get into the science behind how it’s made, but it’s important to mention that it’s found in a lot of cosmetic products. It’s also found in lots of foods, which means it’s entirely safe, which is what’s important. In vaping, VG is used

How does VG affect vaping?

How does VG/PG affect my vaping experience? With VG being responsible for a smooth throat hit and PG being responsible for flavour, that means your vaping experience is going to be affected depending on the ratio you use. Higher VG. With a high VG e-liquid, you can expect a thicker liquid, with a sweeter taste.

What is a high VG e-liquid?

Higher VG. With a high VG e-liquid, you can expect a thicker liquid, with a sweeter taste. You’ll also get a much smoother throat hit. A high VG e-liquid will almost always reduce the lifespan of coils too, as there is a thicker liquid to vaporise. Higher PG.

Why is VG a thick liquid?

VG is a thick liquid, so it will take much more power to “burn through” it. This gives coils a shortened life span. If a liquid is too thick, coils simply can’t work through it to vaporise, so they work harder to do so.

What does PG stand for in vaping?

What is PG? PG then in contrast, stands for Propylene Glycol which is just a food additive that is also added to many different cosmetic products. Similar to VG, PG is found in almost all e-liquids. In vaping, PG is used to replicate the ‘throat hit’ that you get when smoking cigarettes.

What is the best VG PG ratio for a sub ohm vape?

80% VG / 20% PG – this VG PG ratio is the sweet spot for most sub ohm vapers. Terrific for atomizers 0.5 ohms or below. At this ratio, the vapor production is immense and there is still enough flavor to be truly enjoyable.

How much nicotine is in VG vs PG?

The amount of nicotine used in VG and PG e-liquids is very different. The nicotine in e-cigs that use e-liquids with at least 50% P G usually have nicotine levels ranging from 6 mg to 24 mg. The amount of nicotine in VG e-liquids is much less because much more vapor is inhaled, which means less nicotine is needed to achieve a satisfying vape.

What Is PG?

PG stands for propylene glycol. PG is a clear, odorless, and tasteless liquid. It can be produced as a byproduct of fermentation, from fossil fuel processing, or from synthetic production. For vapor products, PG usually comes from synthetic production. This substance is not new. In fact, humans have been using it for more than a century in a number of everyday products. PG is a humectant and can absorb moisture. It is used in foods, toothpaste, shampoo, medications, and it makes vapor!

What is the most common nicotine level in a vape?

The most common nicotine levels for PG liquids are 12 mg, 18 mg, and 24 mg. In the case of VG e-liquids, the nicotine levels range from 0 mg to 6 mg. The most common nicotine levels are 3 mg and 6 mg. Because of the sheer amount of vapor produced, 6 mg is usually all that is required for a satisfying vape.

What is sub ohm vaping?

As a general rule, e-liquids that have more VG than PG are designed for e-cig mods that use atomizers with less than 1.0 ohms of resistance. This is otherwise known as sub ohm vaping. Temperature control vaping also uses atomizers less than 1.0 ohms.

What is the difference between VG and PG?

Also as a general rule, PG e-liquids produce less vapor but a stronger hit. VG e-liquids produce a more gentle vapor, but much more vapor. That is a quick overview of what the PG VG ratio meaning is about.

What is the best e-liquid for cloud chasing?

Vegetable glycerin is used at least in some ratio in almost all e-liquids. It does not carry the flavor as well as PG, but the vapor production is incredible. VG is the preferred ingredient for sub ohm vaping and the best e-liquid for cloud chasing. Cloud chasing may not be the best choice for new vapers. Sub ohm vaping and cloud chasing require some experience and knowledge to fully enjoy.

What is the best VG to PG ratio for vaping?

A lot of vapers like a 50/50 ratio, but I think the ultimate mixture is around 15-20% VG and 80-85% PG. It’s nice to have a small amount of VG in the mix to help thicken the e-liquid and to create a thick and satisfying cloud of vapor. But if you add to much it will take away from the flavor definition and throat hit.

What is VG in e-liquid?

Probably all the vapors know that e-liquid is made up of two main ingredients propylene glycol (PG) and vegetable glycerin (VG). The ratio of PG/VG depends on who makes the e-liquid, in some cases you can even pick your e-liquid PG/VG ratio.

Why is diethylene glycol in e-liquid blown out of proportion?

Basically the whole “diethylene glycol in e-liquid” story was blown out of proportion due to the fact that PG (propylene glycol) is sometimes used in the making of anti-freeze. Hungry reporters were looking for a story, and I suspect big tobacco helped spread this misleading information. People started to associate propylene glycol (PG) with diethylene glycoil causing people to start requesting e-liquid without PG. I believe this is a big reason why we use VG in our e-liquid today.

Is Virgin Vapor 100% VG?

True 100% VG e-liquid is very hard to come by since most flavoring used in making e-liquid come with a PG base. Virgin Vapor does offer 100% VG e-liquid, there flavoring comes in a base of organic ethyl alcohol. I personally don’t like a lot of VG in my e-liquid. I prefer an e-liquid that has defined flavor and a good throat hit over a somewhat thicker cloud of vapor. Anything over 50% VG and 50% PG is too much VG for me.

Does thicker liquid affect wicking?

Yes, thicker liquid can affect the flow/wicking of e-liquid. That’s another reason I prefer the 80pg/20vg mix.

Does e-liquid have PG?

Currently almost all e-liquid comes with both PG and VG. If you make your own e-liquid or if you order e-liquid from a company that lets you select your own PG/VG ratio, it’s important to understand how each ingredient will affect your vape.

Is diethylene glycol in e-liquid?

At the end of 2009 the FDA released a statement claiming that they had found diethylene glycol in electronic cigarette e-liquid. Diethylene glycol is a harmful ingredient used in the making of anti-freeze.

Propylene Glycol versus Vegetable Glycerin

When it comes to PG vs VG e-liquid, there are benefits to both. In fact, many quality vape juices mix different ratios of the two in order to create a specific experience for their users. Unfortunately, some people are allergic to one or the other.

What to Choose?

When it comes to determining the best PG/VG vape juice ratio for your personal experience, there are a few important decisions for a vaper to make.

What is the difference between VG and PG?

The thicker consistency of VG means that it provides more vapor than PG. It also offers less of a throat hit and therefore has fewer similarities with traditional cigarettes than PG based e-liquids.

What liquid is best for vaping?

If you vape for the flavor and are looking for a throat hit similar to smoking traditional cigarettes, then a high PG liquid would be most suitable.

What is VG in e-liquid?

Propylene Glycol (PG) and Vegetable Glycerine (VG) are known as e-liquid bases or carriers. The bases are one of four ingredients that all e-liquids should contain, the other two being flavorings and nicotine. PG and VG are odorless and colorless organic compounds that are members of the alcohol chemical class.

What is the role of PG and VG in e-liquid?

The job of PG and VG in an e-liquid is to act as a carrier compound. When an e-liquid is heated, it changes from a liquid state to a vapor state. The carriers hold the nicotine and flavorings in suspension, so they pass to a vapor state, enhancing the vaping experience.

Is VG thicker than PG?

As VG is a thicker and more dense substance than P G, it will gunk up and clog your devices more quickly. Generally, if you’re using high VG e-liquids, you’ll need to clean your e-cigs more frequently.

Is there a correct ratio between PG and VG?

There is no correct ratio when it comes to PG and VG, and the type of e-liquid you pick will depend on what you personally enjoy about vaping.

Does PG have a stronger throat hit than VG?

PG delivers a stronger throat hit than VG but can cause your mouth and throat to become dry with excessive use.

What VG/PG ratio should I use?

There isn’t a one-size-fits-all answer to this. It depends on the kind of vaping experience you prefer. Many people use various levels of PG and VG for different purposes:

How much PG to VG ratio?

The basics of PG and VG are quite easy to grasp. They both work in different ways, and each has advantages and disadvantages. Our advice is to start with a 50-50 PG to VG ratio then try out various combinations and see which you prefer. Make sure your vaping setup can deal with the different ratios.

What are PG and VG?

PG and VG are the odorless liquids that are combined with flavor and nicotine to create e-juice.

What does PG stand for in vaping?

PG stands for Propylene Glycol, a petroleum by-product. The fluid has no odor or color and is less viscous than VG. In vaping it is used to provide a ‘throat hit’, which some users claim is similar to the sensation experienced when smoking tobacco.

What tanks are susceptible to high VG?

Older products are especially susceptible, particularly models that use smaller coils such as clearomizers. The Nautilus range and eGo tanks are some of the more well-known tanks that are known to have difficulties dealing with high VG fluid.

What is the difference between e-liquid and e-liquid?

They have distinct mouth and throat sensations when vaped. Most modern e-liquid uses a combination of the two fluids, though the ratio can vary dramatically.

Is PG antifreeze safe for dogs?

While PG is regarded as safe for humans and is generally regarded as safe as a food additive for dogs, it has been linked to Heinz body anemia in cats.

What is VG in vaping?

Vegetable Glycerin (VG) is a thick, sweet, and natural chemical that is obtained from vegetable oils . VG is often used in vape juices to introduce the “thick” sensation to vapor. Compared with PG, VG is more vicious and thicker, and it is characterized by a slightly sweet taste. Also, VG gives a smoother “throat hit” than PG and this makes it a better choice for sub-ohming.

Which is better, PG or VG?

PG e-juices tend to offer a better hit at the back of your throat and plenty of flavors. On the other hand, VG-based e-liquids enable the vape atomizers to generate huge vapor clouds.

How to determine nicotine strength in e-juice?

The nicotine strength in the e-juice is determined by the amount of nicotine in the mixture, let’s assume it is about 10%. Also, about 10% of the e-juice mixture is flavoring. The remaining 80% will be filled by diluting the media of the nicotine and flavoring, and this is composed of a combination of PG and VG.

What is VG in e juice?

Sure, every time the discussion of the ingredients of e-juices pops up, two popular terms – PG (Propylene Glycol) and VG (Vegetable Glycerin) constantly crop up. Sometimes these two terms appear a bit confusing to newbies but their knowledge vastly improves one’s vaping experience.

Can vaping cause throat irritation?

Some vapers experience throat irritations when they consume high levels of PG. allergies to this product are not common but have been reported. Now, if you experience some sort of a rash or suffer some unpleasant reaction upon using a PG-based e-liquid, then you might be experiencing some mild PG sensitivity and you should consider shifting to a high-level VG; this option is offered by a variety of vendors.

Can VG and PG be confused?

VG and PG should not be confused by oils and cannot cause medical issues – such as lipoid pneumonia – as oils can cause. Both VG and PG have varied consistency and taste. When vaped, they cause distinct throat sensations. Most vape juices are prepared with the combination of these two liquids with varying ratios.

Which takes longer to steep: VG or PG?

VG-based e-juices take longer to steep than PG e-liquids.

What Pg vs. VG means?

A Balancing Act

How Vaping Works?

Standard Levels

• E-cigarettes usually have a 50-50 ratio. E-cigs are different from other vaping devices, so the 50-50 mix is not usually the best PG-VG ratio. Vape juice for more advanced devices is often 70-30 PG to VG or 80-20. One cool thing about vape stores is that some make their own juice, and most can mix and match in any way you want. For example, they ca...

See more on vapingadvisor.com

What Ratios Mean

Equipment

FAQs