In general, the 50/50 stands for the balanced 50% ratio of the two main ingredients found in e-liquids: propylene glycol (PG) and vegetable glycerin (VG). Due to including 50% of both PG and VG, this promotes a 50/50 e-liquid that delivers an extremely versatile and enjoyable vaping experience.
Can I use 50/50 PG E-liquid for sub ohm vaping?
A 50/50 or PG e-liquid will not work for sub ohm vaping. VG juice is thicker and made for low resistance vape coils. In addition, the VG makes massive plumes of vapor. There is always at least some PG in a VG vape juice to carry the flavor.
What is 50/50 e-liquids?
If you’re familiar with vaping in any way, you may have heard the expression 50/50 used to describe certain e-liquids. 50/50 e-liquid is called so because it contains a 50% Vegetable Glycerine, 50% Propylene Glycol ratio, which allows for an extremely versatile vaping experience.
What is in the vapouriz 50/50 range?
Our Vapouriz 50/50 range is composed of various flavours including fruits, tobaccos, menthols, sweets and beverages, so you’re bound to find something to suit your individual tastes.
What does PG and VG mean on a vape?
Some beginner vapes can only work with a certain level of PG and VG. Choosing the wrong PG/VG ratio can put first-timers off so be careful to choose the right level for your equipment. Now let’s take a look at each in more detail. What exactly is it? PG stands for Propylene Glycol, a petroleum by-product.
What does 50/50 mean on a vape?
In short, 50/50 e-liquid is vape juice with a balanced 50% ratio of the main e liquid ingredients; propylene glycol and vegetable glycerin. These ingredients are otherwise known as PG & VG and are important in helping you choose the right type of e-liquid for your vape kit or vape tank.
Is 50/50 PG VG good?
50% VG/50% PG: (50/50) As we've mentioned, this is a good starting point for experimentation. There are quality exhales along with a perceptible, but not strong, bite on the inhale. Once, was the industry standard, but now 70/30 seems to be the norm.
What wattage is best for 50/50 vape juice?
50VG/50PG. The 50/50 PG and VG ratio is one of the most common ratios available, alluding to a good balance between flavour, throat hits, and cloud production. It is best used in low-voltage devices below 80 watts for producing bigger clouds but without overpowering flavours.
How strong is a 50mg vape?
50mg is considered the equivalent to the nicotine level that's in cigarettes, meaning that those who are used to smoking are more likely to feel satisfied after they vape due to the fact that they're getting about the same level of nicotine that they're used to.
What's better 50 50 or 70/30 vape juice?
Aim for a 70:30 juice, while 50:50 are generally better for flavour in lower powered devices they'll be too harsh in a Sub ohm device.
What is the best vape ratio?
50:50 ratioIf you want maximum flavour out of your e-liquid, you want to choose an e-liquid with a balanced PG:VG ratio, so look out for a 50:50 ratio. Or favour PG in the e-liquid, so an e-liquid with a PG:VG ratio around 60:40.
What is the safest wattage to vape at?
Often, regardless of the type of tank, the best performance of the majority of vapes occurs between 80 and 100 watts. Higher wattages will render your coil “useless” – burn out and reduce the battery life.
Is vaping better than smoking?
1: Vaping is less harmful than smoking, but it's still not safe. E-cigarettes heat nicotine (extracted from tobacco), flavorings and other chemicals to create an aerosol that you inhale. Regular tobacco cigarettes contain 7,000 chemicals, many of which are toxic.
What should my vape settings be?
In most cases, the best temperature for a vape liquid is between 300-400F (194-204C). The range between 325-350F degrees is the best temperature setting for vapers in our opinion. This range provides the right balance between warmth and not too hot feel.
Is 50 mg a lot of nicotine?
Generally, vapers use 1ml daily, so that's 18mg a day in this case. You can then look at the percentages to figure out how many milligrams make 5% of nicotine. The answer would be 50mg. That's a very high nicotine level, and we'll talk more about that in the next section.
Is 5% a strong vape?
There is no question about it, the vape juices out there that contain 5% nicotine in them are definitely strong. They are, in fact, very strong. They're really only made possible through nicotine salts, which have been carefully engineered over the years to vape smoothly at high concentrations.
How many cigarettes is 50mg nicotine?
The Breeze Plus has 50mg of nicotine blended into its recipe, which means it has the equivalent nicotine level of smoking 25-50 cigarettes, depending on the brand.
What is 50% VG 50% PG?
When seeing a liquid listed as 50% VG / 50% PG, this means the e-liquid contains a blend of 50% vegetable glycerine, 50% propylene glycol. The PG contains 10% flavourings and nicotine (if added). This type of e-liquid is best used in pod style vape kits and pen style vape kits.
What ohm is best for 50 50 Juice?
Although we usually recommend 50% VG blends for coils between 1.0Ω or 1.8Ω, some of these juices work perfectly with some very sub-Ohm coils, it's just trial and error between different types of coils and different flavours. Ohms is a measure of electrical resistance, a vape coil that's 1.0Ω or less is sub-Ohm.
What's the best PG VG?
The best PG/VG ratio is dependent upon your preference, if you like big clouds and use a modern, sub ohm e-cig, then 80VG / 20PG might be the best. On the other hand, if you're using a small, EVOD style setup then you would find closer to 50VG / 50PG ratios being the best.
Is it better to have more VG or PG?
High VG e-liquids produce more vapour and have a smoother throat-hit, but the liquid is thick and can clog up coils quickly. E-liquids with more PG give more of a throat-hit and a sharper flavour. The liquid is thinner than VG, making it ideal for use with coils above 1ohm.
What resistances do you use for vaping?
People who prefer mouth to lung vaping are usually the ones who use standard resistances (above the 1 Ohm limit) and those who prefer direct lung inhale use sub-ohm resistances (below the 1 Ohm limit).
What is an ohm in vaping?
What is an Ohm. First of all, ohms represent a unit of measurement for resistance, and when it comes to vaping they translate to how difficult is for the electrical current from the battery to pass through the heating coil. The lower the resistance, the faster a coil heats up to a certain temperature and controlling this value is key in delivering ...
How low can coils go?
The coils today can go as low as 0.15 Ohms (in the case of Kanthal) and there are mods out there that can fire even lower so technology is no longer a problem. Also vapers have discovered that by twisting two or more types of wire together they can create complex coils like 'twisted', 'claptons', 'fused claptons' and 'alien claptons' which in terms give an even better flavor.
Why are above ohm vapes so popular?
The reason for which above ohm resistances remain popular with mouth to lung vaping is due to the restrictive draw these devices can offer and the similarities with actual cigarettes.
What is the difference between lung and mouth vaping?
And speaking about the different styles of vaping, we have two main categories of e-smokers – the ones who prefer mouth to lung hits and the ones who prefer lung hits. Mouth to lung vaping is just like puffing on an actual cigarette, with the vapor going first into the user's mouth and then lungs; while direct lung vaping means inhaling the vapor straight into the lungs.
What is the best tank for mouth to lung hits?
In terms of tanks, the Aspire Nautilus has always been one of the best devices for mouth to lung hits, but you can also go for any product that offers spare resistances above 1 Ohm. On the other hand, if you like to experiment and want to build your own coils, then a Kayfun Lite Plus RTA would be an amazing performer from this category.
Is vaping on a sub ohm or above ohm?
There are still people out there who prefer vaping on above ohm resistances, and their number is probably greater than that of e-smokers using sub ohm devices. While the amount of vapor produced is not as massive as with a sub ohm resistance, some people are more than satisfied with the whole experience and wouldn't trade it for something else.
What does DL stand for in vaping?
Sub Ohm vaping is also called DL vaping. DL stands for Direct Lung Vaping which means that the vapor is drawn directly into the lungs.
How many ohms does a vaporizer have?
That means that the vapor is drawn into the mouth and then inhaled. Much like smoking a cigarette. While the usual range for standard vaping is between 1.5 ohms and 3 ohms, using a vaporizer containing an atomizer coil with a resistance of less than 1 ohm is technically referred to as sub-ohm vaping.
What is the difference between a sub ohm and a regular vape?
This is the main difference between sub ohm vaping vs regular vaping. Sub-ohm vape mods produce bigger and thicker clouds as compared to regular mods. Because there is so much more vapor, the vape liquid used for sub ohm atomizers tends to have less nicotine than a standard e-cig.
Why is sub ohm vaping better?
Think of it in this way, the less resistance there is to something, the easier it is to overcome. In the case of sub ohm vaping, a lower resistance atomizer allows more current to pass through it. Increased current causes a metal element to heat faster. As a result, more e-liquid is more rapidly vaporized.
How to use sub ohm vape?
Here are the key points to remember: 1 Sub ohm vaping uses atomizers with a resistance of less than 1.0 ohms. 2 Also called DL, or Direct Lung vaping. 3 Use regulated mods, mech mods are dangerous. 4 Use sub ohm vape tanks as opposed to building your own coils.
Why do people use more powerful vape batteries?
Initially, people tried to use more powerful vape batteries to get higher voltage , but there are limits on how far you can push the amperage. So, the focus turned to reducing resistance in order to get more current. The lower resistance resulted in thicker vapor — this brings us to sub-ohm vaping.
How many watts does a sub ohm tank use?
Sub-ohm tanks have made life really easy, as you can slam them on virtually any mod, that can work at 30 watts or higher, and start blowing out massive clouds. They are pretty similar to RTAs, but have disposable, built-in coils. They offer nearly the same experience as RTAs, but take convenience to a whole new level.
What does wattage mean in vaping?
In simple terms, wattage is the amount of power that you allow your device to use as you vape. The higher the wattage, the stronger the power of your vape device, but higher doesn’t always mean the best for you!
What is the best mod for vaping?
If you do want to continuously use high watts, box mods may be the best choice for you. A box mod has a chip that regulates your vape and helps prevent malfunctions.
What happens if you increase the wattage of a vaporizer?
Also, remember that when you increase the wattage of your device, your coil works on more power and generates more heated vapor.
When will vaping be available in 2020?
December 9, 2020. June 11, 2020 by John. Every beginner wonders what wattage is best for vaping and there is no clear single answer to that question. The majority of modern vape devices offer a wide range of wattage settings and it could be a daunting task for a beginner to choose the right setting. The wattage you need to choose depends on several ...
What does higher power mean on vapes?
4. Clouds. Just like the temperature of vapes, the thickness of your clouds is also determined by your device wattage settings. Higher power means thicker clouds, and vice-versa. Always remember that higher wattage burdens your coil, so prolonged usage of full-power must be avoided.
How long does e-liquid last?
Whenever you increase your system’s wattage, you should expect a higher consumption of e-liquid. For an average setting, if your e-juice lasts for 2 days , consistently vaping on high power will use it all up in just one day.
How long does a fully charged phone last?
When you run your device on higher wattage, it uses a lot of battery power, so a fully charged device may not last more than a day, or sometimes even less.
What does PG stand for in vaping?
PG stands for Propylene Glycol, a petroleum by-product. The fluid has no odor or color and is less viscous than VG. In vaping it is used to provide a ‘throat hit’, which some users claim is similar to the sensation experienced when smoking tobacco.
What VG/PG ratio should I use?
There isn’t a one-size-fits-all answer to this. It depends on the kind of vaping experience you prefer. Many people use various levels of PG and VG for different purposes:
What are PG and VG?
PG and VG are the odorless liquids that are combined with flavor and nicotine to create e-juice.
How much PG to VG ratio?
The basics of PG and VG are quite easy to grasp. They both work in different ways, and each has advantages and disadvantages. Our advice is to start with a 50-50 PG to VG ratio then try out various combinations and see which you prefer. Make sure your vaping setup can deal with the different ratios.
What tanks are susceptible to high VG?
Older products are especially susceptible, particularly models that use smaller coils such as clearomizers. The Nautilus range and eGo tanks are some of the more well-known tanks that are known to have difficulties dealing with high VG fluid.
How to find your sweet spot without wasting valuable resources?
Unflavored juice – Want to find your sweet spot without wasting valuable resources? Try mixing VG and PG in different ratios. Using only base liquid and some cheap plastic e-liquid bottles you can find the optimal juice viscosity for your gear and avoid dry hits and leaking. This is also
What is the difference between e-liquid and e-liquid?
They have distinct mouth and throat sensations when vaped. Most modern e-liquid uses a combination of the two fluids, though the ratio can vary dramatically.
What is the nicotine content of vape e-liquid?
If you are vaping and have some e-liquid containing 1.2% nicotine, any amount you measure out will be 1.2% nicotine and 98.8% PG, VG, and flavorings.
How to convert nicotine strength to percentage?
Converting from a nicotine strength in mg/mL to a percentage is easy. Just divide the amount of nicotine in mg/mL by 10. To convert back from the percentage to mg/mL, just multiply it by 10.
How many mg of nicotine is in a milliliter?
Nicotine has a density of 1.01 grams per cubic centimeter, which means that 1,010 mg of pure nicotine takes up one milliliter. We can use this to convert mg of nicotine to mL of nicotine. Let’s say we have a 10ml bottle of e-liquid, and we need to find nicotine level in mg.
How much nicotine is in a bottle?
Now that we have the two volumes, nicotine (0.079mL) and the volume of the full e-liquid bottle (10mL), we can calculate the percentage of nicotine in the bottle (0.079/10) x 100, which is 0.79%, which is a very accurate small number, so a manufacturer will round up to 0.8% listed as the nicotine content in the bottle.
What is throat hit in e-cigarettes?
Nicotine has a lot to do with how an e-cigarette performs. This is commonly referred to as the “throat hit.” When moving up or down the nicotine level scale, try only one level up or down compared to the nicotine strength you are currently on due to the throat hit.
Is nicotine percentage confusing?
Nicotine percentages can be confusing to a new vaper, in this article we help make sense of it all.
Does e-liquid have nicotine?
By default, e-juice does not come with any nicotine level. Nicotine is an ingredient that is added. If you don’t currently use nicotine, you should not vape e-liquid that contains any amount of nicotine.