Vaping FAQs

what causes spitback vaping

by Don Marvin MD Published 2 years ago Updated 1 year ago
image

To sum it all up, here are the key points once again:

  • A vape spitting is usually caused by atomizer flooding
  • Spitting often happens in conjunction with the gurgling sounds that indicate flooding
  • Temporarily increase the wattage setting to vaporize any excess juice to handle spitback
  • Make sure your coils heat evenly
  • If spitback is persistent, it may be time to replace the coil
  • Check O-rings and contacts

Spit-back tends to occur when the e-liquid in your tank collects around or in the centre of your coil and is heated too quickly, causing it to 'cook' rather than vaporise. The e-liquid then 'pops' in much the same way as a hot frying pan flicked with cold water, shooting up into the tank and out through the mouthpiece.

Full Answer

Why is my vape spitting back?

Spitting may also mean that changing vape juice is required. Another common cause of spitback is using the incorrect vape juice that is not designed for a particular vape device. For example, a PG e-liquid will be too think for a sub ohm vape. A vape juice that is too think can over saturate a coil designed for sub ohm vaping.

What is a vape spitback?

What is spitback or a vape spitting? A spitting vape is when excess e-liquid in the coil bursts from the coil, up through the mouthpiece, and into the vaper’s mouth. Spitback is instantly noticeable as the liquid in the mouth. The flavor and nicotine will leave a strong sensation.

What causes vape juice to leak?

Gravity can cause flooding and spitback. If a vape is left on it’s side or upside down, vape juice can leak into the chimney and mouthpiece. The first vape from a device that has been upside down can lead to a mouthful of juice! Take some quick, short puffs until the flooding is subsided. Vaping at too high of a wattage can also cause spitback.

Why does my vape gurgle when I hit it?

After a vape has been sitting all night, it is quite common for the first few hits of the day to have some gurgling and spitback. This is because overnight the liquid can seep into the coil. Usually, after a couple of vapes the flooding clears up and you don’t have to worry about it for the rest of the day.

image

How do I stop my vape from spitting?

Flick the tank. ... Remove excess liquid from your tank's centre post. ... Fire your battery before inhaling. ... Reduce your airflow, or take smaller inhales. ... Turn up the power. ... Don't over-prime your coil. ... Use an E Liquid With More VG. ... Cover your mouthpiece.

Is vape Spitback normal?

Why is My Vape Spitting? In most cases, the reason a vape is spitting is the e-liquid is collecting on the coil and it's being cooked rather than vaporised. This causes it to heat up and eventually it'll spit, much like water when it sits on an exceptionally hot surface.

How do you Unflood a vape?

How do you fix a flooded coil?Flick the device to remove excess e-liquid from it.Blow through the tank in order to clear e-liquid from it. ... Remove the coil and leave it to dry on some tissue paper. ... Fire up the device without inhaling (but don't overdo it).More items...•

Why does my vape pop?

The action of heating liquid and turning it into vapor can cause the same reaction in your vape device. If the vape popping sound is excessive, it can ruin your enjoyment of vaping. It could also be a signal that’s something is wrong with your device or your liquid. Here are the primary reasons your vape pops excessively.

How to get rid of spitback on Fire tablet?

If you get spitback from too much priming, press the fire button two or three times. This will help clear out the excess liquid. A little practice and experience will tell you just how much e-liquid is perfect for your device.

How to get e-liquid into your mouth?

Take Short Inhales. Taking a log, deep inhale can force e-liquid into the chamber and into your mouth. If you repeatedly have this problem, you’re probably pulling too hard. Let the coil and the wick heat the liquid. Inhale gently. You’ll take in pure vapor and have a more enjoyable, flavorful vape.

Can you use an RTA with a loose airflow?

You’ll make the problem worse if you use an RTA with a loose airflow. This forces air into the device.

Is it normal for a vape to pop?

Is your vape device starting to pop, crackle and spit back? Don’t worry, it’s not defective. A vape popping sound is normal for any device. Here are some quick, simple fixes.

Why does my vape tank spit back?

It isn't pleasant and it can happen often, particularly if you're a keen modder trying out different components to get the right 'balance' and find the perfect vaping experience. It happens when there's simply too much e-juice in the centre of your coil which can't be properly vaporised. Veterans know how to avoid this, but for those of you just starting out or looking for ways to curb sptitback, here are some things to bear in mind.

What does a downward flick do to a vape?

A sharp downward flick can help clear the coil of any excess liquid, making for a much nicer vaping experience. This is particularly good advice if you've just filled the tank - just be warned that it could get messy so be sure to do it over a sink or some tissue!

How to get vape juice to stop popping?

Another great tip is push the button and fire up your battery for a few short bursts before you start to vape. This will help the the excess liquid evaporate before you begin your vape session. If there's excess liquid in there, you'll hear a popping when you fire up the battery. Simply give this a few short bursts until the popping dies down or subsides altogether. It's a good idea to do this alongside the flicking strategy mentioned earlier.

Where does vapor go when you vape?

Any vapor that hasn't been inhaled will naturally condense and rest in your vape tank's centre post or mouthpiece. There's a risk it might then run down and back into the coil, potentially leading some nasty spitback when you go for your next inhale.

What does it mean to prime a vape coil?

Priming the coil means dropping some e-liquid directly onto it to saturate the wick and get the biggest bang for your buck in terms of flavour. Fans of big, flavoursome clouds will often prime their coils to get the best experience possible, but there is a risk of putting too much liquid in at once. Everyone that's primed a coil has had this experience and learned from it - don't be afraid to experiment and find the sweet spot for your vape kit!

Why does my e-liquid spit?

Spitback has a simple cause: e-liquid gets pooled up on the coil itself and gets “cooked” instead of being vaporized. It spits similar to the way boiling water does, and with you inhaling from the tip, you can easily catch a droplet or two. The problem is closely linked to flooded coils, but, in some cases, it can happen even without flooding. Here are some ways to prevent spitting and popping from occurring.

How to keep vapes from leaking?

Try to keep your vape positioned vertically if you’re not using it for extended periods of time. Don’t get into the habit of laying your device down all the time, or you will have to deal with inevitable leakage.

How to stop vaping from flooding?

Reduce your airflow – Inhaling too forcefully when you vape encourages flooding by literally pulling more e-juice into the chamber. This is easy to solve: inhale more softly, letting the coil and wicking do the work for you. If you’re still having issues, try reducing your airflow setting. However, if you reduce the airflow, be careful not to inhale too strongly to compensate—this could just make the issue worse.

Why do multistrand coils pop?

Avoid exotic coils – This applies mainly to rebuildables. Multi-strand coils often pop and spit due to their design. Twisted coils in particular have a bad reputation for this, but Clapton coils may have the same issue. Their design makes it easier for e-liquid to pool on the coil, and so sometimes it’s hard to entirely avoid popping on these coil types. The easiest advice if you absolutely want to avoid spitback is using simple round wire instead.

What happens if you inhale too much liquid?

If you inhale too forcefully, you risk bringing too much e-liquid into the coil, which may lead to leakage. Watch out when filling – Never overfill your tank. Always leave a small air pocket at the top when filling. This empty space will help prevent any liquid from leaking out.

How to remove e juice from a tank?

First make sure the threads are in sync and closed tightly, but not too tight. Find that sweet spot. If the threads are crossed, screw it back together carefully. Remove e-juice from chimney – All tanks have a central airflow tube that runs from the body of the tank up to the drip tip, known as the chimney.

Why does my tank leak out of the airflow holes?

Put a lid on it – If you leave a tank without the top cap, it will leak out of the airflow holes. That’s due to the pressurized nature of tanks. Make sure that your tank is empty if you plan on leaving your top cap off for extended periods of time—anything longer than it takes to fill it.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9