For temperature control, all that you need is a vaping device that supports stainless-steel coils – which almost all mods built in the last few years do – or allows you to enter a custom TCR. Compared to the other two coil materials used for temperature control vaping – nickel and titanium – stainless steel has a significantly lower TCR.
What is the best temperature control coil for vaping?
SS can be used in wattage or temperature control mode. Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated.
Which vape wire should I use?
This simple question will cut your work in half when choosing which wire you will vape with. Kanthal, Stainless Steel and Nichrome are the only wires (as of now) that can be used in wattage/variable wattage mode. Titanium, Ni200 (nickel) and Stainless Steel are the only wires that can be used (as of now) with Temperature Control.
What are the different grades of vape coils?
It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel.
What is nickel-chromium vape wire?
Nickel-Chromium Vape Wire. NiChrome was the metal that started it all. It became well known and widely used back in 1905 when scientists realized it possessed anti-oxidizing properties, allowing the metal to function at high heats without being damaged through oxidation.
Is nickel good for vaping?
Nickel is a toxic metal and a known carcinogen. Which means it is classed as a dangerous material and is poisonous not just to the environment, but also to your health. Nickel vaped at high temperatures may cause the nickel to produce vapour which can be very damaging.
What is the best coil material for vaping?
For coil building, SS316L is by far the most commonly used grade, followed by SS317L. Other grades like 304 and 430 are also used sometimes, but not so often. Stainless steel is easy to form and holds its shape well.
What's the best wire for vaping?
Best Wire Type for VapingKanthal – As one of the most widely available types of coil wire, Kanthal is extremely popular. ... Stainless Steel – In contrast to Kanthal, using stainless steel provides a very quick ramp time. ... Titanium – This is one of the least used of the four that we have covered.More items...•
What resistance coil is best for flavor?
Coils With a Rating At 1.0 Ohm or Above Coils with at least 1.0 ohm resistance are designed for 'mouth-to-lung' vaping. They produce a subtle, cool vapour with intense flavour.
Are titanium coils safe?
A question vapers frequently ask is 'how long do titanium coils last? '. Although they are more expensive – titanium lasts a lot longer than any other metal, meaning you won't need to replace them anywhere near as often. These coils are also one of the safest options and not affected by rust or corrosion.
Are stainless steel coils better?
Stainless Steel Vape Coils Compared to kanthal, stainless steel has a slightly lower resistance and a slightly faster ramp-up time for a given wire gauge. Unlike some of the other non-kanthal coil materials, people generally find that stainless steel doesn't introduce any off flavors that require getting used to.
What coils are best for clouds?
The best coil build for cloud chasing vapes are:staple coil.Clapton coil.fused Clapton coil.parallel coil.twisted coil.
What type of metal is used in vape coils?
The most commonly used coils are made of alloys of iron, chromium, and aluminum or nickel and chromium.
What is the best ohms for vaping?
The standard or regular level of ohm when it comes to vaping and your clearomizer is between 2.4 and 2.8. This is by far the most common ohm range chosen by those looking for replacement coils, with the most commonly chosen being 2.5. This standard level tends to offer the most consistent level for your vape.
How do I get the best flavor from my vape?
Shake the bottle every now and then to speed up the process. Another option is to place your vape juice bottle in a sealed bag and immerse it in a container full of warm water. When the water has cooled, remove the bottle and give it a good shake. The flavour should be significantly more robust.
Is more resistance better for Vapes?
However, if you adjust the coil to a resistance higher than 2.8 Ohms, you will notice a considerable reduction in the amount of vapour and heat, because the wattage (W) is lower (approx. 4.4 Watts). This means that you should increase voltage (v) to increase wattage (W) and get a better puff.
Are higher resistance coils better?
The benefits of a higher resistance coil are much more steady battery use, a cooler vape and less vapour. This of course is all a matter of preference. If you're keen on big clouds then you can forgive draining battery life (or just keep a few spares on you).
Which is better Kanthal or Nichrome?
Kanthal has a slightly higher maximum operating temperature as well as a higher melting temperature than Nichrome, giving it a slightly longer lifespan than Nichrome. Some people claim that Kanthal wire puts off a slightly metallic taste due to the Iron composition, whereas others claim it does not.
What is the best coil build?
The best coil build for cloud chasing vapes are:staple coil.Clapton coil.fused Clapton coil.parallel coil.twisted coil.
Are ceramic vape coils better?
A ceramic coil uses ceramics to make the coils more durable, long-lasting, and even more protective against metal oxidation. Although they take longer to start than other coils, they have several advantages like no dry hits, longer lifespan, and superior flavor (although this is subjective).
Which is better fused Clapton or Clapton?
A fused Clapton is a thinner gauge wire wrapped around two or more thicker gauge cores. The multiple cores give fused Claptons a faster ramp-up time and arguably better flavor than non-fused Claptons, due to the increase in surface area.
What is “temperature control” vaping?
Temperature control (TC) in vape mods is a technological solution for dry and burnt hits. It also creates a consistent vape while taking longer drags because the temp stays the same—instead of getting hotter. The user chooses the temperature limit, typically from a range of 300°F to 600°F (100°C to 315°C). The power sent to the coil then automatically adjusts to keep the coil—and your vape—at the chosen temperature.
What is the best wire for vaping?
TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.
Why is my vape consistent?
Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.
How to fix dryness in vape?
When vaping in TC, if you do notice any dryness when you’re low on juice, adjust the temperature down. If your mod has wattage control in TC, you can adjust that too. Higher is usually fine, but don’t go too low; as mentioned earlier, your mod should limit your wattage when the set temp is reached, but it won’t compensate when the wattage is set too low.
What type of wire do you use for vaping?
Next, you must vape with the right wire type. TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
How does TC vaping work?
For TC vaping, you’ll use wires that have a known resistance-increase as their temperature rises. The mod checks the resistance of the coil at room temperature, then it continues to monitor it as you vape. The resistance change is converted into a temperature increase and the mod adjusts its power to maintain the selected temperature. Think of it as a car traveling in cruise control. To maintain a speed, more power is needed to go up a hill than down a hill… but the speed would stay the same.
Why do TC coils last longer?
TC coils can last longer than normal power-mode coils, and wicks last a lot longer too because they’re not exceeding the designated temperature necessary for a good vape.
Elimination of Dry Hits
If you’ve ever had a dry hit because you were chain vaping or forgot to refill your tank, you know how unpleasant dry hits can be. They taste awful and create a terrible burning sensation in the throat and lungs. They’re also probably very unhealthy. A dry hit happens when e-liquid stops reaching the atomizer coil in your e-cigarette.
Cooler Vapor
If you currently use a sub-ohm tank and operate your e-cigarette in wattage mode, it might surprise you to learn that your device’s atomizer coil reaches temperatures much higher than are possible in temperature control mode. If you like your vapor on the warmer side, you might think of that as a drawback.
Increased Coil Life
If you vape at high wattage settings, chain vape or consistently take long puffs, it’s likely that you’re vaping much of the time with a wick that isn’t completely saturated with e-liquid. If you’re vaping with a wick that isn’t wet, you’re damaging the wick and reducing the life of your coil.
Different Taste
You can’t use a standard kanthal coil for temperature control vaping because the resistance of a kanthal wire doesn’t change significantly when the wire is heated. Temperature control mode requires a coil material with a high thermal coefficient of resistance.
Reduced Coil Selection
If you use a sub-ohm tank with pre-made coils, you might find your first visit to a local vape shop disappointing when you decide to give temperature control vaping a try. Since they’re slow sellers, many vape shops don’t carry nickel or titanium coils. It’s also getting harder to find new sub-ohm tanks with nickel and titanium coils available.
Different Coil Building Process
You don’t need to worry about selection if you build your own atomizer coils – you can simply buy a spool of nickel or titanium wire and start building. You’ll find, though, that the process of building a nickel or titanium coil differs significantly from the kanthal coil building process.
SuperSaiyanVape Full Member
I know theres many discussion about this but i cant seem to find a perfect answer. My question is WHICH IS THE SAFEST FOR VAPING? I have been using power mode for sometime now and i want to enter temp control. Nickel had issues with leeching into juice, titanium has tiO2. What do i do? How often shud i change the coil?
MunkMunk Full Member
Just for sharing... i only uses SS 316L for tc mode...very smooth in terms of taste.
Robert Cromwell Moved On ECF Veteran
Kanthal for me and I use a combination of voltage and resistance to control temperature.
sofarsogood Vaping Master ECF Veteran
It may be that at low temparatures these wires don't emit anything. I use temp control exclusively and keep wire temperature below 450 degrees.
spalife Senior Member Verified Member ECF Veteran
It may be that at low temparatures these wires don't emit anything. I use temp control exclusively and keep wire temperature below 450 degrees.
spalife Senior Member Verified Member ECF Veteran
I noticed a difference in taste between temp control and watts control but that may have only to do with how the wire heats, not the chemical makeup of the wire. Regardless, do any of these various wires leach any of their material into the vapor in quantities that bear on health concerns.
Imperialchugger Super Member Verified Member ECF Veteran
i prefer ss over ti but having problem with tc lately. kanthal is all great but you do miss the temp protection and no burn hits.
Why is temperature control important in vaping?
The main purpose of temperature control vaping is that it helps you avoid dry hits. Well, you can also do that yourself by vaping at a reasonable wattage and remembering to refill your tank. In that sense, temperature control vaping is an interesting gimmick, but it’s completely unnecessary for most people.
What is nichrome vaping?
Nichrome is a blend of nickel and chromium. The ratios of the two metals can vary; the most common nichrome alloy for vaping is Ni80, which consists of 80-percent nickel and 20-percent chromium.
What happens if you exceed the temperature limit on a mod?
Temperature control made it possible to set a temperature limit for your coil, and if the coil ever exceeded that limit, your mod would cut its power immediately to prevent a dry hit or burned wick. For temperature control technology to work, the electrical resistance of the coil needs to change when the coil heats up.
What material is used for RDA coils?
Nichrome is a common material for pre-wrapped RDA coils, but you won’t see it often in the world of sub-ohm tanks. When you’re shopping for sub-ohm tank coils, kanthal and stainless steel are the materials you’re most likely to see. Compared to kanthal, stainless steel has a slightly lower resistance and a slightly faster ramp-up time ...
Why do you need to replace a coil?
You’re replacing the coil because e-liquid residue has collected on the heating surface or because the wick is burned. The wire itself can last for an extremely long time.
Why is Kanthal used for heating elements?
The reason why kanthal works so well for heating elements is because it behaves in an extremely predictable fashion when an electrical current travels through it. Kanthal immediately forms a protective layer of aluminum oxide when it’s heated, allowing it to remain extremely durable in long-term use.
Can you use nickel coils in wattage mode?
Nickel and titanium coils are intended for temperature control vaping only and should not be used in wattage mode. Even if the resistance of a nickel or titanium coil is within your mod’s supported range, wattage-based vaping is intended only for a coil that remains relatively stable in resistance during use.